Quote:
|
Originally Posted by race-rodz
make sure everything is spotless clean. dirt, lint, all that other fun stuff stands out 100000000% more on a light solid color than on any pearl/met color.
my personal favorite is painting something with a high met color, half a$$ the cleaning of the booth prior to painting something black....roll it out side and see the panel you just painted has a nice fine met to it only visible in sunlight. this is the point where you smack yourself in the back of the head and clear tomorrows schedule....cuz you doin a redo, after you spend extra time cleaning the booth out.
one of these days when i get rich...im gonna have a nice fancy downdraft....so i can remember back to when everything was a PITFA
|
i love my blowtherm baking oven downdraft booth!!! good advice, jody apply 2-3 coats of base, then carefully check entire car for dust etc, wet sand with 800-1000 anything you find then dust in base, as rod says it will look worse then a dark color because not only will you see the chunk but more then likely it will stick way out being on a light color