View Single Post
  #2  
Old 07-27-2007, 09:27 PM
camcojb's Avatar
camcojb camcojb is online now
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,207
Thanks: 6,568
Thanked 2,017 Times in 919 Posts
Default

Quote:
Originally Posted by ItDoRun
This has probably been asked before, but I'm looking for some options for an automatic (with overdrive) tranny for a 600-650 fwhp twin turbo set up. I keep hearing of the 4L80E but have no clue what this is. I'm not looking for anything fancy, just something I can put in drive and cruise (with an occasional leaning on the throttle!). Any suggestions?
I'm running a 4L80E behind my twin turbo LS2. It's basically a TH400 with electronic controls and overdrive. The recommendation is good because it can handle that power easily, has overdrive, and full electronic controls which mean you can set all the shifting speeds and pressures.

If you don't need overdrive then a TH400 would be the cheapest way to go.

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote