I know this is an old thread but there is some incorrect information. The Chassisworks Camaro clip does NOT maintain stock track width if you are running the standard 11-3/4" front rotors. It's 3/4" wider per side, 1-1/2" wider overall for a total of 60" wheel mounting surface to wheel mounting surface. This is narrower than the DSE frame and the Morrison, I don't know about the rest, there are too friggin' many. It IS the stock track width if you are using the 13" or 14" brake kit.
__________________
I'm probably just screwing with you, so please don't take it personal.
Last edited by crazycarl; 09-15-2007 at 11:36 PM.
|