Chicane -- thanks -- that's the kind of info I was looking for! What do you mean when you say to "set the camber rod positive"? I'm planning on running about 1/2 to 1 degree negative camber @ ride height. Also, you are correct -- that is 4" of travel measured at the shock.
Frank -- always a pleasure to get your inputs
........ I called you a while back when I was trying to get the driveline set up.
So is the general consensus that running less than 2 degrees of angle on the halfshafts is good? I have to see how that affects my ride height -- I already have the rear end set in the car. Luckily, I have the car with a little rake dialed in -- I can drop the rear if needed. Also, I think if I lower the rear so that there is about 1 degree of angle in the halfshafts, the car will probably be level......thought a little rake made the tiny car look aggressive!
thanks for all the inputs!!
-jeff d