Tim Allens Injected Hemi
We just finished Tuning Tim the toolman Taylors 490 inch Hemi Portflow brought us this engine to handle the injection and ignition.We made it individual coil per cyl and were able to really bring around this beast it started off making 410 hp by the time we were done it made 675 ft lbs and 662 hp with 600 lbs at 3000rpm.And did it with 8 2.5 inch butterflys talk about a crap vacumn signal.We had to redesign to kpa table to get it to run but it all worked out.Hats off to Portflow because we beat this sucker for 3 days on the dyno and everything held up good.attached are some shots on the dyno.
|