Well this is the email i got back from Wilwood
"Thank you for using Wilwood products.
The GM A-body is usually not a problem for caliper/shock interference. It is likely you will need to reposition the lower mounting point of the shock, as the caliper mounting position is not negotiable. I would look for a way to extend the lower shock mount inward toward the center of the rear axle to ease clearance. Feel free to call or write back with any further questions or if we can be of further service on this issue."
So it looks like i`ll have to weld a tab or something??
Thanks
__________________
George
`67 Buick GS ,"The Black Widow II"494ci,Stage 2,5-speed G-Machine
|