use a good quality gun with a 1.3 or 1.4 tip have it adjusted for full fluid (so trigger almost touches handle when pulled all the way) have fan set to full, and spray light to medium coats with 75% overlap, i would rather do 3-4 light to medium coats then 2 heavy, todays pearls, metallics lay out nice, you should have no trouble, also when you start on a panel say the hood, do the entire hood then go around vehicle don't start in middle of hood then work around and finish in middle of hood, by the time you get around the base coat on the hood has already tacked and will not melt in.
|