Thread: svt 65 stang
View Single Post
  #22  
Old 06-29-2005, 06:23 AM
SN65 SN65 is offline
Senior Member
 
Join Date: Jun 2005
Posts: 199
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Hi All,

Let the blocking begin. :-)

After a day of blocking, this is what we have accomplished. Both quarters. Sides and top.

WoHoo!!!

Now on to the roof and trunk.

Here is a photo of the collision center from the outside (for anyone who is a bit curious).

Also, here are some photos of the battery cable run. We are pretty much set except for the final location of the battery box. We just need to find a location that will clear the gas tank and any existing wiring. Sounds like a snap, but I am sure that this will give us a bit of hartburn before it is all over.

Also, when we ran the chassis grounds, we tied a couple of seperate of items together and grounded them with one terminal. I hope this dosen't end up biting me in the butt. A ground is a ground is a ground.

Right???

Bob
Come see this WIP at
Julian's Collision Center
http://www.julianscollisioncenter.com/
Attached Images
     

Last edited by SN65; 06-29-2005 at 06:26 AM.
Reply With Quote