I did one back in '96 and since then, a lot of magazine's have had builds on this with the same short block. I did mine with a Goodwrench 250...
Typical 425+hp 87 octane pump gas engine:
195cc TFS or 195cc AFR heads, small chamber
FelPro steel shim gasket
Edelbrock Performer RPM Air Gap
1/2" phenolic four hole spacer
Holley HP series 750cfm
Comp Cams XE camshaft, either the XE268 or XE274 (both are hyd flat tappet)
CV Products/Champ Pans oil pan 1080LTRR
1 5/8" to 1 3/4" headers, 2 1/2" exhaust with X-pipe
Sprinkle with MSD parts and flog.
|