[ironworks]

Ok so some pics of the upper rails starting and the A sneak peak at one rear rail we will install tommorrow. Enjoy. You can also see the problem we are having routing the tubing to the Chris Alston crossmember. I called ATS today and I think their pan will solve this problem. The tape line on the tube is where we cut off the previous tube and the tape line on the engine is where the ATS sump on their pan gets moved back to from stock. If worse comes to worse we may slide the engine back about a 1/2 To 1" to make things fit.

2 guys working today, without looking at time cards 20 hours ish.

Rodger