I started out redoing the whole car because I bought it cheap as a theft recovery, lots of problems with it. I fixed it up mechanically, it was 100% apart from paint. Some mods here and there but really just a nice driver. Then I got rearended and was working on fixing that when I noticed one door hinge had excessive play. Took that door off and noticed a werd spot on the a pillar, decided to investigate and before I knew it the front clip was off completely. Found some nasty damage there, fixed it and wanted to build the car back up again and then something came over me, dunno what it was but I ended up with this (havent worked on it in months, been busy w/ a 77 vette and a 69 mustang 428cj mostly) I'd say I've changed directions a few times. I built 2 complete rear suspension systems for it, first a 5 bar system with additionial upper control rods (to eliminate the halfshafts as geometry components) and later built a double a arm susp.
