Quote:
|
Originally Posted by killer69
the shims all depend on the condition of the sub frame, if it has sagged or is bent, our arms are also built to factory widths, it sounds like the wheel off set is wrong, what size and back space wheels do you have?
|
Well, the subframe shoud be fine. Stock but with reinforced welds everywhere and all straightened out.
We are pretty sure the wheel size is wrong. We ordered a 18x9.5 with a 5.5 BS. I calculated that based on a ton of research and seeing guys make this work on a stock subbed 68 with aftermarket control arms. I know I will lose a little bit of turning radius but not that much to be a prob. Our measurements show the wheel is 1/2 to 1 inch off - like they took an 11 inch well and cut it short instead of taking a 10 and cutting it to 9.5 like we asked. We are sending it back now.
Front tire size is 275/35/18 FYI.
thanks