While I don't have step by step info (because I still need to do it on my car)... I will tell you it's a VERY good idea to install drain tubes into the lower corners while you have it apart. Silver solder or epoxy in some stubs of stainless tubing in the lowest parts of the window channel corners and then run vinyl tubing or hose down from those stubs and out the trunk floor behind the wheels. That way any water in the window channel can drain away rather than collect and starting rot.
__________________
1969 Chevelle
Old setup: Procharged/intercooled/EFI 353 SBC, TKO, ATS/SPC/Global West suspension, C6 brakes & hydroboost.
In progress: LS2, 3.0 Whipple, T56 Magnum, torque arm & watts link, Wilwood Aero6/4 brakes, Mk60 ABS, Vaporworx, floater 9" rear, etc.
|