We made a bunch of progress on the Camaro this weekend.
When the car came in, the air ride tank, the solenoids and the compressors were all mounted to the floor with drywall screws. We welded up a frame work for the compressors and solenoids out of 1/2″ square tubing. We welded flat bar to the rack and then drilled and tapped them to mount everything to it. We bolted the tank to the floor and then the rack was bolted to the mounting tabs of the tank.
We then sprayed the rack with an epoxy coating from Eastwood, it’s “Satin Black Chassis Paint”
