Next up was the amp rack. The car has some issues with the trunk sealing properly sometimes so we wanted to make sure that should water get into the trunk there was nothing there that would be damaged by water. Traditionally we would make the amp rack out of MDF but if water gets into the trunk, it won’t last very long. We took some more 1/2″ square tubing and welded up the amp rack and welded flat bar to mount the amps to it just like the air ride rack.
We then welded the top section of the rack and welded mounting tabs to it so it can be secured into the truk. Like the air ride rack, we sprayed it with the Eastwood Chassis Epoxy Paint.
The amp rack is bolted to the floor of the trunk using thread inserts and stainless bolts/washers.
