Quote:
|
Originally Posted by abadsvt
... The rocker arm pivots off a custom made rod end. The rod end screws into a welded in bung. The welded bung was reinforced with some 3/16 thick plate on top of the .120 tubing for some extra support...
|
to have a pic of that would be nice, but not a necessity, so if it is no big deal to get a pic I would appreciate it.
There are more than a few rockers out there I have seen that didn't use some sort of heim/rod end and that is a big mistake (they just use a bolt thru a sleeve or something for pivot) and I am interested in seeing other's ideas when they "do it right". sounds like you did it right.