Quote:
|
Originally Posted by DRJDVM's '69
If I lay it flat on the ground and kneel on one side the other side is a good 1/8 inch off the ground. Same if I put a straight edge across it...
Left messages with McLeod....nothing returned yet.
|
Yikes... I would be concerned then. iI was thinking it was tweaked maybe .020" or so... 1/8" is not likely to flatten out!
I would exchange it. Odd for something that out of spec to slip out of McLeod, but then again my BH had an improperly machined register ring (bore too small by .007" or so)