View Single Post
  #1  
Old 03-11-2008, 09:48 PM
syborg tt's Avatar
syborg tt syborg tt is offline
Lateral-g Supporting Member
 
Join Date: Jun 2005
Posts: 8,436
Thanks: 5,592
Thanked 2,023 Times in 1,089 Posts
Default 03-12-08 Update - More miles then a Vegas Hooker

Good Morning All,

The Turbos are done and look really nice.
Both Guy and Precision Turbo really took care of me.

Guy & I started talking and we realized these Turbos have been shipped via UPS so many time it's just not right.
So here is a really long story -- see if you make it to the end.


So way back on June 25, 2004 I purchased custom Turbos from Precision Turbo.
www.precisionturbo.net www.rockfordracecraft.com

Precision Turbo shipped them to Rockford Racecraft. - 140miles

After Rockford Racecraft looked them over, he drove them to Competition Fabrication - 51 miles
www.compfab.com

When the truck was completed at Comp Fab they headed to my Shop - 54 miles

About 4 months later I loaded truck w/Turbos and headed to Recovery Room Interiors to meet Kenny - 601 miles
www.recoveryroomrodinteriors.com

Kenny Hauls truck, motor & those Turbos back to his Shop in Arkansas - 413 miles
www.kdhotrods.com

A short while later Kenny Ships Turbos back to my shop - 592 Miles
www.sportmachines.com

Then I ship Turbos to Rockford Racecraft so they could Polished and Hi-Temp all the surfaces of the Turbos. - 93 miles

Now here's were it gets fun ( if you've read this far )

In order to Hi Temp Coat the center section of the Turbo's you have to send the center section to Precision Turbo so they can take it apart - 144 miles

Precision Turbo - disassembles Center Section and Ships it back to Rockford Racecraft - 144 miles

Rockford Racecraft High temp coats the center section and then ships it back to Precision Turbo - 144 miles

Precision Turbo Reassembles the Center Section and ships them Back to Rockford Racecraft - 144 miles

Rockford Racecraft puts everything back together and then ships them to Kenny Davis - 617 miles
( really I hope this is there last Journey )

Now that's a lot of miles -- how many not sure it's late.

Okay so here are the Turbo's and yep there in the new bed on the new line-x liner.
Note the center section is officially Hi-Temp Coated Black



The imperfections in the housing were tig welded prior to polishing.



Exhaust Housing were done in a silver finish.



Final Picture
yep - there they are sitting on that new line-x bed liner

__________________
marty-mj
Is a car ever really done???? It's like a ball of yarn unwinding, that has no end... Author DKz Garage

Projects - Syborg TT 4.3l v6 Mini-Truck, 2nd Chance Camaro & SLP575 Bumble Bee - 4Sale
Reply With Quote