ok I hope I did this right....I put the wheels up in the quarters and squared them up by measuring up centre to centre of the tires front and rear,then I made sure the wheels were level up and down,then I did 3 measurements around the wheel well inner lip to tire.The tire in the middle of the wheel well to the quarter lip is 3/4",at the back of the wheel well I have 1/2" from quarter lip to tire and finally I have an 1" and 1/4" at the front of the wheel well tire to quarter lip.My overall flange to flange width is 56 and 3/8".My rotor flanges are 1/4" thick so multiply this by 2 and minus that from my overall lengh and my new diff flange to flange measurement should be 55 and 7/8". My rear rims as per Fikse measurements on my invoice are
18x12 with 6.125" backspacing.Does all this sound
right????
|