[Derek Miller]

Flash68,

What size wheel do you have and with what backspacing? The car pictured in my avatar is what I am currently working towards. The car is a 68 Camaro that was originally painted British Green. I don't know if want to take it back to the original color. Paint is one of the hardest decisions to make. I would like to stay with an original color. I am toying around with painting it Corvette Bronze with the black SS stripe. Right now, I am debating whether to modify the stock frame. I currently have the Global West upper control arms. If I stay with the original frame, I plan on getting the Global West lower control arms and running air bags. I would get the ATS tall spindles and Lee power steering. I would like to run 19" wheels all the way around and would like 19X9s on the front. If I don't use the stock frame, I will most likely go with the AME subframe with air bags. In the rear, I am planing on using the mini tubs from Detroit Speed and use the G-bar with air bags and a 9" rearend. I use Photoshop to edit the cars and try out different wheel combinations. I am going to use the RS grill but will shave the bottom turn signals and possibly fender turn signals as well. On the back, I will be using the 1967 Marquez tail lights but will shave the back up lights on the bottom. I might black out the rear panel, not sure yet. Here are a few wheels I have narrowed it down to. The first car is to show you the image I started with (not my actual car). The second and third images use the IForged Essen wheel, gray then black. The fourth one is the Kinesis with a red pinstripe. The last one is a Fikse. Let me know what you think