[Vegas69]

I got my oil sender all set up for my gauges along with the temp sender in the manifold. I have to get a 90 degree elbow to make it work. The block is made for this elbow. I bet the factory does it the same way.

I got the master cylinder all mounted up for mock up of the brake lines. I made a bracket out of 1/8 inch aluminum and mounted my proportioning valve and ran the brake line all the way to the rear. What a pain in the ass! I bought the jegs 25 ft roll and had my crapsman flare tool break at 11:30 at night!!!! They replaced it

I went ahead and mocked up my radiator and breather tank just to get an idea on my firewall set up.