Hey Guys,
Saw the post and had to reply. I know everyone likes to hide things for the cleaner look but!!!! It is the worst thing you can do. Vibrations, chassis flex and all that good stuff that gos along with a moving machine causes ABBRASION!! In my experince of doing what I do I've seen hardline with at least an 1/8 wall thickness rubb rite through and cause a pin hole leak. So shoving soft line through areas that you don't know where a sharp edge is won't make for a good time when gas is flowing. The best way is to take your time make or buy nice clamps and route the line or hose properly. The most negleckted part of car builds are the last but most important. You can't GO or STOP with out properly routed fuel and brake systems Believe me I've seen it all!!! I hope this helps
|