Thread: Double glass?
View Single Post
  #2  
Old 06-04-2008, 09:56 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,254
Thanks: 6,737
Thanked 2,085 Times in 953 Posts
Default

Quote:
Originally Posted by jannes_z-28 View Post
I was one of the early customers on the Marquez Billet stuff and have a question about the rear light glasses. I got the custom design with clear glass. Now I have seen that durt or dust has creeped up in the glass. I have also seen when I wash the car that there is mist in the glass.

I believe that the clear glass is doubled, one outer clear glass and one sheet of structured glass. To me it seems like moisture has gone in there between the sheets.

I guess it is not so difficult to remove the silicone that holds the glass to the billetframe and clean this up.

Just want some confirmation on my suspicions before I take it appart.

Pasqual??


Jan

they are two pieces. Generally red with a clear piece behind with the prism cuts in it. They did do a couple of clear ones for overseas, but they are two pieces siliconed in.

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote