I just talked to Speedway engineering and they gave me some useful info. I thought i would share since you guys are helping me out. They recommended me using nylon busings (non greasable) part # 605-125. Those nylon bushings go into a 1 3/4" piece of .065 tubing. I can use a thicker piece of tubing .083 and so on. I would just have to bore it out. The nylon bushings are designed to use an 1 1/4" sway bar and the sway bar arms, if designed proper, will hold the sway bar centered. The sway bar arms are 3/4" thick.
A questions for you guys. Instead of using standard sway bar arms do you know of a company or someone who makes the sytle of sway bar arms in the picture above.
Thanks alot
|