Here's a little update on the 62. We have been working on the chassis to get this big boat planted to the ground. Well the rear had to be done from scratch. No one makes anything for the B -Body cars. So we just made it ourselves. With the help of our good friend Wade Sellers. We started with a Moser 9 rear housing made for the B- Body brackets, But found out this just wasn't going to work. We wanted the car to sit low with out bags. So the solution was a coil over set up. We notched the frame for the coil overs to clear .chopped the pan hard bracket did a little cutting on the global west bracket and pretty much did what ever it took to get this thing on the ground. The coil overs will ride up through the truck panel behind the rear seat. Now on to the front. Here's some picks as of today.
Ben Hermance and Tracey Weaver are working on the interior sketches.
There's a lot more to come in the next week.
Last edited by PRRC; 11-09-2010 at 09:24 AM.
|