You could use epoxy, stay about a quarter inch away from your spot welds with the epoxy, you can brush it on if you want to where the metal will be sandwiched together. On my web site I did a test with weld thru-primer and epoxy to see how far a mig weld would burn it back.
Also on my site under floor pans I have some pictures where I show how far I stayed back for the plug welds that hold the floor pan to the floor supports.
Anyway, just trying to help.
Rob
__________________
"There are questions to be answered, and answers to be questioned"
Jigs, sandblasting, shop, paintroom, rotisserie, pictures, little bit of everything.
http://www.1969supersport.com
|