I tore it down today. Very simple, like you said.
Went to Napa for a new seal and they can't match it up.
Went back to the guy I got the diff from and he gave me a seal, but it is a tiny thin thing.
I am taking the drive shaft to be balanced Thursday and will see if they have a good quality seal there.
The 9" builder used a junk yoke to set it up that had super deep groves in it. It appears pulling that on and off cut the new seal. My yoke is nice and smooth.
I assume I am going to run the nut back down on the yoke as tight as I can with some lock tight.
|