ok i need a good mask,suit,something for bootes.us a propane torch and wire brush heat the lead till it turns shiny then brush it out the seam.as im doing this should i just remove what i need to just do repair or remove all of it and replace with metal filler.i have ran 36 grit over it to just remove paint and the lead looks good on quarter i just need to repair the area down in the window frame not up on the quarter.i have replaced the metal on front and i had to cut out some of the small pegs for the clips for the window trim.i have seen people use rivets for clips but i was told they make screw in pegs but i dont know were to find them. thanx for the comments it helps alot .
|