I am looking to get close to 500/500 at the rear wheels. It will be a manual transmission. Im trying to learn as much as I can about the ls engines, its all very new to me since Ive been building sb/bb cars since I was 15. Im exploring all options but really want 427 cubes. Im finding that with some companies the bore and stroke really varies in order to get there. I would prefer the 4 inch stroke and 4.125 bore. Im finding it may be more economical to just buy a crate zo6 spend the 1k on the GM ecu/pedal kit and another 750 for peterson resivoir and maybe spend an extra thousand on the katech torquer cam. Perhaps I could save a lot more going with a cammed LS3 dont know what kind of power they make though. Thanks for all the ideas and suggestions - Thanks Rich
|