Kenny & Travis putting it all together.
It's starting to look like something.
As promised here is the hardware list - WOW !!
Bolt & Washer S-10 Steering Box
1 pcs --- 12mm Clevis Washer - 25mm OD - 3mm Thick - 0.473in ID - .984in oD - .118 THK
1 pcs --- 7/16-14 x 4.18 small Hex Head - Large Flange - High Strength
Upper Ball Joints
8 pcs --- 1/4-20 x 1 Twelve Point - Large Flange - .56in - High Strength
8 pcs --- 1/4 AN Flat Washer - .50in OD - 18-8 SS 6mm Flat Washer
Upper Control Arm
4 pcs --- 1/2-20 x 3 Hex Flange Head - 17-4 PH High Strength
4 pcs --- 1/2-20 Tall Nut - 304 SS - 70,000 Yeild Strength
4 pcs --- 1/2 Split Lock - 18-8 SS
4 pcs --- MS 818 Flat Washer - 1.06in OD - 18-8 SS
Pivot Shaft
4 pcs --- 5/8-18 Nylon Locking Nut - 18-8 SS
4 pcs --- 5/8 x 1 3/4 Body Mount Washer - 1.81 OD - 18-8 SS
Lower Control Arms: ( Drill out 12mm Bushings to 1/2" )
2 pcs --- 1/2-13 x 4 Flanged Hex Head - 17-4 PH High Strength
2 pcs --- 1/2-13 Nylon Locking Nut - 18-8 SS
2 pcs --- 9/16-12 x 4 3/4 hex Flange Head - 17-4 PH High Strength
2 pcs --- 9/16-12 Nylon Locking Nut - 18-8 SS
Idler Arm
4 pcs --- 7/16-14 x 1 Twelve Point - Large Flange - High Strength
4 pcs --- 7/16 AN Flat Washer - .75" OD - 18-8 SS
Caliper Bolts
10 pcs --- 7/16-20 x 2 Twelve Point - Small Flange High Strength
10 pcs --- 7/16 AN Flat Washer - .75in OD - 18-8 SS
Caliper Brackets
opps we ordered the wrong size
8 pcs --- 3/8-24 x 1 Twelve Point - High Strength
4 pcs --- 3/8-24 x 1 1/2 Twelve Point Flange Head High Strength
4 pcs --- 3/8-24 x 2 Twelve Point - High Strength
16 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0 mm OD
Rotor to Hats
32 pcs --- 5/16-18 x 1 Twelve Point - Large Flange - .63in - High Strength
32 pcs --- 8mm Standard Flat Washer - 15.7mm OD 5/16 Flat Washer - .62 OD - Din 125 A2
Four Link & Panhard Bar
10 pcs --- 5/8-11 x 3 Flanged Hex Head - 17-4 PH - High Stength
10 pcs --- 5/8-11 Nylon Locking Nut - 18-8 SS
20 pcs --- 16mm Standard Flat Washer - 29.7mm OD 5/8 Flat Washer
Front Sway Bar
4 pcs --- 3/8-16 x 1 1/4 twelve Point - Large Flange - .63in - High Strength
4 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0 MM OD
Sway Bar Mount
4 pcs --- 1/4-28 x 1 Twelve Point - High Strength
8 pcs --- 1/4 AN Flat Washer - .50in OD - 18-8 SS 6mm Flat Washer - 12.7mm OD
4 pcs --- 1/4-28 Twelve Point Nut - High Strength
Rear Sway Bar
4 pcs --- 3/8-24 x 1 1/4 Twelve Point Flange Head High Strength
8 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0mm OD
4 pcs --- 3/8-24 Twelve Point Nut - High Strength
Front Air Bag
4 pcs --- 3/8-24 x 1 1/2 Twelve Point Flange Head High Strength
8 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0mm OD
4 pcs --- 3/8-24 Twelve Point Nut - High Strength
Rear Air Bag
4 pcs --- 1/2-13 x 2 1/4in Hex Flange Head - High Strength - 17-4 PH
8 pcs --- 1/2 AN Flat Washer - .875in OD - 18-8 SS 12mm Flat Washer: 22.2mm OD
4 pcs --- 1/2-13 Nylon Locking Nut - 18-8 SS
Transmission Mount
4 pcs --- 3/8-24 x 1 1/2 Six Point (Small Hex Flanged Head) High Strength
4 pcs --- 3/8-24 Twelve Point Nut - High Strength
8 pcs --- MS 813 Flat Washer - .875in OD - 18-8 SS
Fuel Cell, Air Tank & Roll Bar
30 pcs --- 3/8-16 x 1 Twelve Point - Large Flange - .63in - High Strength
30 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0mm OD
Intercooler to Frame
4 pcs --- 5/16-24 x 1 1/4 Six Point (Small Hex Flange Head) High Strength
4 pcs --- 5/16-24 Twelve Point Nut High Strength
8 pcs --- 8mm Standard Flat Washer
Fuel Pump, Cooler Lines & Ground Studs
16 pcs --- 1/4-20 Serrated Flange Nut 18-8 SS
16 pcs --- MS 809 Flat Washer - .56in OD 6mm Flat Washer - 14.2mm OD - 18-8 SS
Fuel Pump Ground Stud
1 pcs --- 3/8-16 Serrated Flange Nut - 18-8 SS
1 pcs --- 10mm (0.394 ID) Clevis Washer, 20.5mm (.812) OD, 2.5mm 12 GA. Thick DIN #1440-A2
Dust Sheild
6 pcs --- 3/8-16 x 1 1/4 Twelve Point - Large Flange - .63in - High Strength
6 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0mm OD
1 pcs --- Bellhousing Kit - General Motors Vehicles - Automatic Transmission or Aluminum Bellhousing - 1 1/2" High Strength - Small Hex Head
Transmission Pan
20 pcs --- 5/16-18 x 1 Twelve Point - Large Flange - .63in - High Strength
20 pcs --- 8mm Standard Flat Washer - 15.7mm OD 5/16 Flat Washer - .62in OD - DIN 125 A2
Inner Fender
30 pcs --- 1/4-20 x 1/2 Twelve Point - Large Flange High Strength
pcs --- missing washer -- Forgot to Order
Misc Bolts
2 pcs --- 6-1.0 x 25mm 12 Point - High Strength
2 pcs --- 8-1.25mm x 25mm 12 Point - High Strength
20 pcs --- 3/8-24 x 1 Twelve Point - High Strength
28 pcs --- 3/8-24 x 1 1/4 Twelve Point - High Strength
6 pcs --- 3/8-24 x 1 1/2 Twelve Point - High Strength
50 pcs --- 3/8-24 Twelve Point Nut - High Strength
100 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0mm OD
100 pcs --- MS813 Flat Washer 0 .875in OD - 18-8 SS
20 pcs --- 5/16-24 x 1 Twelve Point - Large Flange - .63in - High Strength
20 pcs --- 5/16-24 Twelve Point Nut High Strength
40 pcs --- 8mm Standard Flat Washer - 15.7mm OD 5-16 Flat Washer - .63in OD - DIN 125 A2
20 pcs --- 1/4-28 x 1 Twelve Point - High Strength
20 pcs --- 1/4-28 twelve Point Nut - High Strength
40 pcs --- 1/4 AN Flat Washer - .50in OD - 18-8 SS 6mm Flat Washer - 12.7mm OD