Today I dropped the last of the stuff I need plated off to the industrial plater I used before. I picked up my calipers a few days ago from the coater.
Boys and girls don't try this at home. I now have so much time in these front calipers its not even funny. About 2 hours sanding and shaping. About 4-5 hours with an xatco knife cuting the high heat tape for the coater and another 6-7 hours with the smallest dremel bit I have ever seen (apox 1/16") and xacto knife trimming the coating out of the letters and getting the masking tape out. My vision is finally a reality and I don't have to worry about seeing 50 cars with the same aftermarket brakes.
Drum roll please...So what do you think?
