Quote:
Originally Posted by rich-allen
I think it's a little late............ In one day Rodger managed to design a plate to bolt up the procharger to a Synyster serpentine setup. I don't think this has ever been done  : |
Nice work. I'm sure Rodger has this covered, but just in case............. make sure you build a nice brace for the main blower plate to prevent movement. The stock brackets also have this issue, and the twisting movement fore and aft of the blower under throttle makes belt slippage a big issue. It can be as simple as a solid 3/8" steel rod bolted to the main plate near the blower or the blower itself, and mounted to the front of the head, block, intake bolts, etc.
Looks awesome Rich/Rodger.
Jody