[abadsvt]

Well i got a little more done. I was able to get the driverside header done but it was a long week. I originally built a "shorty" header but after i got it built i decided that i wanted long tubes and i wanted them equal length primaries. So i started over and built a new header. I did some reasearch and found out that 32" primaries are the ideal length for the LS1's. The final out come was well worth my frustrations because it looks sweet, equal length primaries (which was a pain in the a$$ to design and build), long tube header, all tucked in the frame (nothing is hangin below the frame) and the best part of it all the collector is the exact height as the rest of the exhaust so from the collector through my frame is all the same height so it will be nice and level. I still have to do a little more welding and build the other side but that should be easier or hopefully less frustrating . Anyways here are some pics and in some of the pics the 3rd tube looks like it is close to the frame but it is actually has plenty of clearance.