The wheels were orderd monday. 18x11 and 18x8.5 With some BFG tires.
We got the tubing yesterday to build the exhaust. But they backordered the main U bend I need to start the exhaust at the header. We are going to modify the floor to suck the mufflers up into the floor so they don't hang below the body.
We made some minor tweaks to the procharger bracket and need to work on the reinforcement plates for the bracket. I was going to order the intercooler today so we could start the plumbing.
We might start laying out the center console rear soon. We got all the mods to the bumper brackets done.
I need to take the bumpers to have them stripped so we can start cutting them up for the Mods we are going to do to them.
I was going to order some baer track tie rod deals from ATS today with some adjustable spring pockets deals from ATS also to set the car at the ride height we are shooting for. Plus give us the option of playing with the spring rate. The QA 1 deals will not allow us to get that.
We will be smoothing the firewall hole and setting up the AC unit he had, to install it under the dash.
Oh and every one can sleep better we pulled the vinyl top off the car yesterday.
Sorry not much to see yet, but real soon we should have pretty bad ass monster.
Rodger
|