2300 TVS Eaton
First, I support both Wegner & Magnuson.
I bought MY 2300 TVS from Jerry Magnuson, also the LS-92 intake, intercooler, etc.
I bought the lower blower pulley that Casey Wegner made (around the ATI dampner), Casey's water pump spacers, bolts.
The LSX block I used is stock 4.00" bore, LS-7 crank, LS-7 pan, oil pump, Crower rods with .990 pins, LS-92 heads.
I also have fitted CP "flat top" pistons.
I hope to "dyno" in two weeks.
Lance
|