[67ragtp]

Paul,

Got a couple questions, what size threads are in the booster where the master cylinder mounts? Thats an unusual size and pitch Im guessing 11mm x1.5 pitch, please confirm, had trouble finding a bolt at the local auto parts store.

I recieved my system with two 3/8-16 long cap screws in the threaded bores mentioned above, are these the prefered hardware to mount the master? Seems a bit sloppy in there since you can spin the master back and forth in the larger bores(using a 1-1/8 wilwood master).

The last one I ordered from you, for a first gen camaro was a 3021/3023 , this one is a cp3014 is this correct for a first gen camaro, it almost looks identicle to the one in my 67 camaro, the A-body instructions inside the info packet is prompting me to question it.

Thanks Rich