View Single Post
  #50  
Old 09-08-2005, 05:14 PM
camcojb's Avatar
camcojb camcojb is online now
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,283
Thanks: 6,922
Thanked 2,121 Times in 973 Posts
Default

Quote:
Originally Posted by evilzee28
If they were set up for adjustment, will the outer surround still fit the gravel pan apperture ok ie does the surround stay still & the housing move (I hope that makes sense)

what would the cost be for a pair of front lights & for a pair of RS style rears.I'm in no rush for them so if it takes Pasquel a while to make the proper bracketry to take the brighter bulbs, then no problem. Carriage would have to be to Great Britain. Probably about the same as to Jannes in Sweden
The billet piece doesn't move; the bracket pivots aiming the driving light itself. I'd have to check on the freight, would need a complete address. You can pm or e-mail if you like.

The front lights are $199 shipped, but not to the UK! We will be offering a discount on them very shortly to $179.95 shipped, but we'll have to get you your freight. By the RS style rears, do you mean the taillights? They are normally $253.95 shipped for the set, but will be $230 shipped. If you bought the side markers at the same time there is a 15% discount on all pieces instead of 10% discount quoted above.

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote