[fesler]

You can do this, you will have to run a large cowl hood to get the engine up a little. The oil pan is going to be your problem as they hang down on the engine, you may have to rebuild it to fit. Not a big deal but a small problem.

The engine and tranny with exhaust, intake and some PPE programming will get you about 600HP and 800-900FT so this thing will fly. HP is cool but you feel TQ and that is what will make the car fast.

I have a few of these engines in trucks that are beefed up and my 10-inch 2008 lifted Chevy on 38s will hang with vettes all day. It is super fast and will weight alot more than a Camaro so you are going to fly. I have a ton of info I can get you for the performance side so you can get it right the first time.

look up PPE and use them for the computer and all programming, they do these engines in boats and sand vehicles and they work hand in hand with GM so they have the best programming and eq you can get. They also build the tranny to handle the weight but you wont need that. We do it in the trucks because of how heavy they are.

Start a post on this when you start it because this is going to be very cool. there will be a lot of guys who hate it but who cares be different. Good luck