1. Re-wired the fan relays - all is well there now.
2. A/C harness taken care of when fan relays were in proper working order (switched to normally open and ground activated)
3. Still can't shut it off. Didn't look into this in much detail tonight. Don't know if I have an improper hook up, or if I need a diode or light wire hooked to the system through the main power feed????
4. Transmission - pulled the pan and studied the harness and wires there. Figured out to hook up the ground, then run the other lead back from the 4th gear pressure switch so the computer would sense 4th gear - then ran the hot feed coming from the relay to the TCC solenoid.
Got it running for a brief moment -
Need to figure out the no-shut-off thing...then set up for the cam break in.
https://www.youtube.com/watch?v=ZXvVjBZCpwk