67-68 Taillight
The 67-68 taillight is going to offered in a few trim options. We currently have three designs of the filler trim that we will be offering to fit in the inside perimeter of the billet housing. 1. Small trim around the outer perimiter of the red lens to make the lens about 1/4 inch smaller, 2. A trim that will split the lens in half, similar to the 68 design and, 3. One that has a small back up light in the center of the lens. We will post pictures of the lights with all three options when we have them done.
I would have made more agressive changes to the light housing itself, but we had some design limitations that we needed to work around. In additon we will be offering a matching billet gas cap, and a set of rally sport back-up lights with the taillights.
I believe our light improved the rear look of 67-68 Camaros. However, the lights can appear stock if one was willing to have them plated in chrome and paint the center of the billet black.
We still need to have new gaskets made and have the billet trim inserts laser cut before we release them to the public, but a certain few will be getting the first few for feedback. The light fits very nice and it will accept the factory stamped sheet metal light housing. We will try very hard to release them to the Market before SEMA.
We are in the process of developing a new look with LED's. It is very unique from what is currently available on the market. We have many ideas for 67-68 Camaros and will pursue them all in time.
pascual
marquez design
|