Quote:
Originally Posted by bentfab
Rodger,
I rang the wrong phone.
John,
Good luck trying to find it in a 45. Either Godman high performance or Pure choice motorsports I think has that adapter in a strait. Or you can go to a local auto parts store with an Edelman brass air hose fitting selection. Take a fitting that has a 1/8" compression hose to 1/8 pipe female adpter like in your autometer oil pressure kits. Unscrew the hose side and if I remeber correctly that thread will screw into the shraider hole. From there you can put a 45 on it but it might start to look ugly being that long. Hope this helps.
|
Thanks but, yeah, just too many adapters on top of adapters. I wanted to find a tee that had a 1/16" male NPT-1/16" female npt-1/8" female NPT. This way I could use the 1/16" Male NPT where the schraeder valve was and move the scrhaeder to the 1/16" female NPT and put the fuel pressure gauge on the 1/8" NPT.
John