Well we took the motor and got it bolted up to the trans, new LS6 clutch, slave friday evening- did it in the back of my pickup truck, tied it down and saturday went up to my body mans place - its about 40 mi each way which isnt bad but at least its not a $25 trip now, unfortunately with the colder weather he didnt get a chance to paint the fire wall so it didnt "make it home" but will be next trip we did pull the old 8.2 pont rear end and springs out. we figured up where the shock crossmember needs to be welded in the lower back half of the car will then get some paint on it and the built 8.5 rear end will be ready to install with the Hotchkis springs and hardware. was hoping to get that done but his welder was inop at that time - oh well, more delays but it was some progress.
We then turned our attention to the interior we pulled the steering column, all the wiring harness and all the rest of the insulation - thats falling apart anyway and we also used some body filler spreaders to scrape the cardboard like stuff off the roof - all in all, nasty dirty work that HAD to get done sometime! Dirty nasty stuff- blowing all that out of the car and then his shop I'm glad that its done! We did also manage to have some tasty beverages
so it wasnt a total loss - next time out I should have some pics of the engine drop in and the rear getting put in it.