Quote:
Originally Posted by DOOM
TJ. Is your patch TIG or MIG 
Mario |
Quote:
Originally Posted by 68protouring454
the only way to metal finish a but welded panel like bruning is tig, its looks like there using reg filler, but silicon bronze works very well and keeps the heat down when welding and metal finishing
|
Tig. Mig welding has its place (not trying to sound like a tig or bust snob), but not for light gauge sheet metal work.
Tim used silicon bronze filler on some of the thin areas around the quarter skin. The patch was fit and fusion tacked in place. Very little filler rod was needed. The upper section above that patch was also replaced right below the window area.