Quote:
Originally Posted by Roadbuster
Is the automatic transmission cooling connections in an aluminum radiator sufficient for this purpose? It would be nice to be able to reuse that when I swap to a manual trans.
Jon
|
In short... no.
The minimum line size for an enginer oil cooler in any application is -10 (1/2")... and allow me to stress this...
the very minimum size. Ideally, -12 is perfectly suited for the majority of applications here... but there are some that may even require -16 for the feed with multiple -12 returns.
The associated in tank auto trans cooler is much too small fitting-wise and capacity as well.
Although... it may be used for the return side of the power steering... in lighter duty applications.