The C&R does not have a shroud. It's a blank on both sides.
Mine is dual-pass with fittings on the passenger side. However, they are sized for Gen1. You would want them fitted for LS sizes. You could also have the in/outlets modified for angle/height/length/curves to accomodate a standard hose.
Measure your fan width and height before making the call. That way it will be easier to narrow down the choices. Max total width for the lower tanks would be helpful as well.
Something else to think about. If I could do it all over again I would make a lower mount/upper plate similar to a 2nd gen. Basically a floating mount so that the radiator is not hard-mounted to the radiator support.
|