you will have to cut it a bit. About 1/2 to 3/4 of an inch if I recall. Not much considering how big the brace is. Also, this depends on what tail shaft you have on your T-56. If it is a LT1 or LSX T56 then yes. Not sure about Viper, etc. Do you have the trans? if not, check out the new T56 from tremec. It can handle 700ftlb is a bit narrower and has the shifter 2 inches forward of a current LSX type T56. And it is 3k.
Just cut the brace a bit and box it in.
|