Here is the rear all mocked up.
Next up I moved on to fitting the sub-frame and powertrain along with the DSE frame connectors.
I fitted the DSE sub to the body with solid bushings also from DSE and sqaured it. Once this was done with the shell off the rotiserie the frame connector installation was a breeze. I installed them completely except for welding them to the sub-frame itself. that way I could break it all back down for blasting and paint. The frame will be welded to the connectors later after the priming and finishing of the bottom of the shell.
Once this was done I decided to mock up the engine and transmission to the car.
Tommy