I picked up the subframe and rear end housing from the powder coaters today. It cost me more than they originally quoted me a few months ago, but it included sandblasting, priming and coating so I guess I can't complain. It ended up costing me $480 to get the subframe, rear end housing, motor mounts, trans cross member and c-clips done. I love the way it turned out with one exception, which is my fault. This is the first time I've had anything powder coated and I got so used to how thick POR15 is. POR15 fills in a lot of blemishes and small dents and such. There are a couple small areas where I assumed the powder coating would have filled in, but it wasn't as thick as I thought it was. I wish I would have spent a little more time doing body work on the frame so I wouldn't have the few little spots. But on the other hand, if anyone sees the spots that I'm referring to, I better be at the car too cause they're way too close. Anyways, here's some pics. Hope to start putting some of it back on Friday.
Rear end housing
Close up
Subframe
Motor mounts, trans cross member and c-clips
