Its a 72 with flares to widen the stance, Baer 6s calipers on the front, afx spindles (c5 hubs), spc a-arms, full tube frame with the only stock piece left being the part that holds the front a-arms and control arms. The motor is a 581ci big block with an F2 procharger, Bell intercooler custom headers, etc. Two kirkey road race seats on the inside, willwood brake pedal and a roller throttle pedal. The back has a 4 link with coil overs, nine inch rear. I still have lots of work to do but at least its over half way. In this pic its sitting way too high with the drag race tires on it before I started the front suspension work. I also might be doing something about the current engine height.
And when its all done some fresh paint.
