[fesler]

Hey Rodger,

Our 69 is all hand built like what you want to do, we used a Wayne front end and rebuilt the complete thing to get the cross member 1/2 inch off the ground and lowered the body over the frame, we rebuilt the complete back all by hand and the 3-inch exhaust allows the car to sit 1/2 inch off the ground and still drive.

Cant do full turns but I can drop it right to the ground while driving. I set out to build the lowest functional Camaro out at the time and think we achieved most of that. We also have a 345/35ZR19 on the rear and a 275/30ZR19 on the front so super wide wheels and we can do full turns.

I can send you some detail shots if you want or you can check out the post as we are finishing up the car now. Its getting ready to go into paint.